IEC62196 Electric Vehicle Multiple Portable Socket-Outlets Mechanical Strength Test Apparatus
Complied Standards & Clauses
IEC 62196-1Ed.4CDV: 2020 "Plugs, Socket - Outlets and Couplers for Industrial and Similar Applications, and For Electric Vehicles" clause 26.3, fig 19.
IEC60884-1:2006 "Plugs and socket-outlets for household and similar purposes- Part1:General requirements" clause 24.9 and figure 29.
GB2099.1-2008 "Plugs and socket-outlets for household and similar purposes- Part1:General requirements" clause 24.9 and figure 29.
Equipment Overview
It is used to test the mechanical strength of rewirable plugs and vehicle connector which is equipped with flexible cable.
Test principle: The free end of the cable and an additional rope or other flexible means, etc., attached to the flexible cable, both having a total length of 2,25 m, is fixed to a wall at a height of 1 m above the floor.
The sample is held so that the cable is horizontal and then it is allowed to fall on to a concrete floor. This is done eight times; the cable being rotated through 45° at its fixing each time.
Rewirable plugs and vehicle connectors are fitted with a small section (approximately 200 mm) of the lightest type of flexible cable of the smallest cross-sectional area recommended by the manufacturer.
The sample is held so that the cable is horizontal and then it is allowed to fall on to a concrete floor. This is done eight times; the cable being rotated through 45 ° at its fixing each time.
After the test, the samples shall show no damage within the meaning of IEC 62196-1Ed.4CDV 2020; in particular, no part shall have become detached or loosened. The samples shall not expose parts likely to become live. The samples shall maintain their IP rating.
Accessories with a degree of protection IP44 and higher shall withstand the relevant test specified in IEC 62196-1Ed.4CDV 2020 clause 20.
Accessories with enclosures of thermoplastic material shall withstand the test of IEC 62196-1Ed.4CDV 2020 clause 21.4.
Technical Parameters
| The height of dropping | 1000mm |
| Dropping times | 8 |
| Rotating device | 45°, it can be rotated in all sides. |
| Size | 2300*500*860mm |
Questions & Answers
Q: What is the dropping height?
A: The dropping height is 750mm.
Q: What are the size for this device?
A: The size of the device is about 2400×850×400(mm)W×D×H. Weights 50kg.
Details:
Product Tags:
|
|
Electric Vehicle Multiple Portable Socket Outlets Mechanical Strength Test Apparatus Images
|
